Differences

This shows you the differences between two versions of the page.

--- developersguide:minixonarm [2016/10/26 20:01]
dullroar
+++ developersguide:minixonarm [2016/11/18 18:31]
dcvmoole [Running Minix/ARM] not just for the xM
@@ Line 94: / Line 94: @@
 ====== Running Minix/ARM ======
-Once the sd-card is inserted on the BeagleBoard-xM press the reset button and watch the serial for messages. Alternatively you can start the same image in the emulator (Read about that in   [[.:minixonlinaroqemuarm]]). for information on network booting, see the [[developersguide:netbootingarm|Netbooting ARM]] article.
+Once the sd-card is inserted on the BeagleBoard-xM (or BeagleBone) press the reset button and watch the serial for messages. Alternatively you can start the same image in the emulator (Read about that in   [[.:minixonlinaroqemuarm]]). for information on network booting, see the [[developersguide:netbootingarm|Netbooting ARM]] article.
 <code>
@@ Line 173: / Line 173: @@
 See ARM-specific (or not ARM-specific!) points on the [[:Wishlist:]] page for the current list of todo's.
-===== ARM Manuals =====
+====== ARM Manuals ======
 The ARM Cortex-A8 processor is used in the Minix-supported BeagleBoard and BeagleBone devices. Many ARM documents require registration and some are behind a paywall, but the following is freely available from the ARM site as of October 2016:
   * [[http://infocenter.arm.com/help/topic/com.arm.doc.ddi0344k/DDI0344K_cortex_a8_r3p2_trm.pdf|Cortex-A8 Revision: r3p2 Technical Reference Manual]]