User Tools

Site Tools


releases:3.2.0:usersguide:manpagesforadmins

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

releases:3.2.0:usersguide:manpagesforadmins [2014/11/11 08:52] (current)
Line 1: Line 1:
 +====== MAN pages for administrators ======
 +
 +[[http://​www.minix3.org/​manpages/​man8/​add_route.8.html|add_route(8) - configure IP routing.]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​adduser.8.html|adduser(8) - add a new user to the system]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​backup.8.html|backup(8) - backup files]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​badblocks.8.html|badblocks(8) - put a list of bad blocks in a file]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​boot.8.html|boot(8) - from power on to the login prompt]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​checkhier.8.html|checkhier(8) - check the directory hierarchy]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​chown.8.html|chown(8) - change owner]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​cleantmp.8.html|cleantmp(8) - clean out a tmp dir]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​config.8.html|config(8) - configuring MINIX 3 tasks and servers]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​cron.8.html|cron(8) - clock daemon]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​dhcpd.8.html|dhcpd(8) - dynamic host configuration protocol daemon]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​dosminix.8.html|dosminix,​ mkfile (8) - Running MINIX 3 under DOS]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​elvprsv.8.html|elvprsv(8) - Preserve the the modified version of a file after a crash.]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​fdisk.8.html|fdisk(8) - partition a hard disk [IBM]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​fingerd.8.html|fingerd,​ in.fingerd (8) - remote user information server]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​ftpd.8.html|ftpd,​ in.ftpd, setup.anonftp (8) - DARPA Internet File Transfer Protocol server]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​getty.8.html|getty(8) - system login banner]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​halt.8.html|halt(8) - abruptly stop the system]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​ifconfig.8.html|ifconfig(8) - configure a TCP/IP device]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​inet.8.html|inet,​ inet.conf (8) - TCP/IP server]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​init.8.html|init(8) - grandparent of all processes]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​installboot.8.html|installboot(8) - make a device bootable]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​intr.8.html|intr(8) - run a command with interrupts enabled]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​irdpd.8.html|irdpd(8) - internet router discovery protocol daemon]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​mkdist.8.html|mkdist(8) - make a MINIX 3 distribution]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​mknod.8.html|mknod(8) - create a special file]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​monitor.8.html|monitor,​ edparams (8) - load and start MINIX 3, modify boot parameters]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​nonamed.8.html|nonamed(8) - not a name daemon, but acts like one]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​part.8.html|part(8) - partition table editor]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​partition.8.html|partition(8) - make a partition table]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​pr_routes.8.html|pr_routes(8) - show IP routing.]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​printroot.8.html|printroot(8) - print the name of the root device on standard output]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​pwdauth.8.html|pwdauth(8) - password authentication program]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​rarpd.8.html|rarpd(8) - reverse address resolution protocol daemon]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​rdate.8.html|rdate(8) - set time and date from a remote host]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​readclock.8.html|readclock(8) - read the AT's real time clock]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​reboot.8.html|reboot(8) - reboot the system immediately]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​repartition.8.html|repartition(8) - load a partition table]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​rlogind.8.html|rlogind,​ in.rlogind (8) - remote login server]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​rshd.8.html|rshd(8) - remote shell server]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​screendump.8.html|screendump(8) - write current console screen to standard output]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​serial-ip.8.html|serial-ip(8) - Serial IP (SLIP or PPP) setup]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​service.8.html|service(8) - Start or stop an operating system server or device driver.]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​setup.8.html|setup(8) - Install MINIX 3 on a hard disk]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​shutdown.8.html|shutdown(8) - graciously close the system down]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​slip.8.html|slip(8) - Serial Line IP]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​srccrc.8.html|srccrc(8) - compute CRC checksums of the entire source tree]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​sync.8.html|sync(8) - flush the cache to disk]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​update.8.html|update(8) - periodically write the buffer cache to disk]] \\
 +[[http://​www.minix3.org/​manpages/​man8/​usage.8.html|usage(8) - installing and using MINIX]] \\
  
releases/3.2.0/usersguide/manpagesforadmins.txt · Last modified: 2014/11/11 08:52 (external edit)